What LED bulb replaces a 300 watt incandescent?
| Light outputthis is the number to shop by, not the watts | 5,000lumens |
|---|---|
| LED wattage needed | 50W |
| Incandescent wattage | 300W |
| Efficacy assumedagainst 14 lm/W for a filament bulb | 100lm/W |
| Running cost a year3 hours a day at $0.17/kWh — the incandescent costs $55.84 | $9.31 |
| Rated lifeabout 22.8 years at 3 hours a day | 25,000hours |
Notes
- **Buy lumens, not watts.** A watt is what the bulb *consumes*; a lumen is what it *emits*. The habit of shopping by wattage only worked while every bulb was a filament burning at the same efficiency. A 300W incandescent puts out about **5,000 lumens**, and any bulb of any technology hitting that number will look the same brightness.
- A LED reaches 5,000 lumens on about **50 watts** because it produces roughly 100 lumens per watt against 14 for a filament. Instant on, dimmable if the driver says so, and barely warm.
- **Running cost is where the difference actually shows up.** At three hours a day and $0.17 per kWh, this bulb costs about **$9.31** a year against **$55.84** for the incandescent it replaces. Multiply by the number of sockets in the house before deciding it is a small number.
- Packet equivalence claims run a little optimistic — a box marked "60W equivalent" is often 750–800 lumens rather than a clean 800. Check the Lighting Facts panel on the back, which has to print the real figure.
- Brightness is only half the choice. Colour temperature decides whether the room feels warm or clinical, and it is independent of both the watts and the lumens on this page.
300W in LED
A 300 watt incandescent puts out about 5,000 lumens. A LED reaches the same light on 50 watts.
Buy lumens, not watts
A watt is what the bulb consumes. A lumen is what it emits.
Shopping by wattage only ever worked while every bulb was a filament burning at the same efficiency. Once LED and CFL arrived, the same watt buys four to seven times the light — so the habit now picks the wrong bulb.
5,000 lumens is the number to shop by. Any bulb of any technology hitting it looks the same brightness.
Where the difference comes from
A LED produces about 100 lumens per watt against 14 for a filament bulb. That ratio is the whole story, and it is printed on the box if you look for lm/W.
Running cost is where you actually notice
At three hours a day and $0.17 per kWh, this bulb costs about $9.31 a year.
Multiply by the number of sockets in the house before deciding that is a small number. A twenty-socket house is where the arithmetic stops being trivial.
Check the panel, not the front of the box
Equivalence claims on the front run a little optimistic — a box marked "300W equivalent" is often a shade under 5,000 lumens.
The Lighting Facts panel on the back has to print the real figure, and it is the only number on the packaging that is regulated.
Brightness is only half the choice
Colour temperature decides whether the room reads warm or clinical, and it is independent of everything on this page.
Nearby sizes
Read more
- LED Dimmer Compatibility: The Four Checks Before You BuyCompatibility is not a mystery, it is four specifications. Check them before buying and you avoid the trial-and-error most people go through.
- Why LED Lights Flicker When Dimmed — and the Fix OrderThe dimmer is usually not broken and the bulbs are usually not faulty. They were designed for each other's opposites, and there are four fixes worth trying in order.
- CRI 90 vs 80: What the Ten Points Actually Cost YouTen points on a hundred-point scale sounds marginal. It is the difference between a room where the colors look right and one that feels vaguely tired.
- Color Temperature Chart: Every Kelvin Value and Where It GoesThe scale runs backwards from intuition and the useful range is narrower than the chart suggests. Here is every value, what it reads as, and where it belongs.