What CFL bulb replaces a 60 watt incandescent?

60W incandescent → CFL

13.3W

both put out about 800 lumens — the CFL does it on 13.3 watts

Light outputthis is the number to shop by, not the watts	800lumens
CFL wattage needed	13.3W
Incandescent wattage	60W
Efficacy assumedagainst 14 lm/W for a filament bulb	60lm/W
Running cost a year3 hours a day at $0.17/kWh — the incandescent costs $11.17	$2.48
Rated lifeabout 7.3 years at 3 hours a day	8,000hours

Notes

Buy lumens, not watts. A watt is what the bulb consumes; a lumen is what it emits. The habit of shopping by wattage only worked while every bulb was a filament burning at the same efficiency. A 60W incandescent puts out about 800 lumens, and any bulb of any technology hitting that number will look the same brightness.
A CFL reaches 800 lumens on about 13.3 watts because it produces roughly 60 lumens per watt against 14 for a filament. Compact fluorescent — takes a moment to reach full brightness.
Running cost is where the difference actually shows up. At three hours a day and $0.17 per kWh, this bulb costs about $2.48 a year against $11.17 for the incandescent it replaces. Multiply by the number of sockets in the house before deciding it is a small number.
Packet equivalence claims run a little optimistic — a box marked "60W equivalent" is often 750–800 lumens rather than a clean 800. Check the Lighting Facts panel on the back, which has to print the real figure.
Brightness is only half the choice. Colour temperature decides whether the room feels warm or clinical, and it is independent of both the watts and the lumens on this page.

60W in CFL

A 60 watt incandescent puts out about 800 lumens. A CFL reaches the same light on 13.3 watts.

Buy lumens, not watts

A watt is what the bulb consumes. A lumen is what it emits.

Shopping by wattage only ever worked while every bulb was a filament burning at the same efficiency. Once LED and CFL arrived, the same watt buys four to seven times the light — so the habit now picks the wrong bulb.

800 lumens is the number to shop by. Any bulb of any technology hitting it looks the same brightness.

Where the difference comes from

A CFL produces about 60 lumens per watt against 14 for a filament bulb. That ratio is the whole story, and it is printed on the box if you look for lm/W.

Running cost is where you actually notice

At three hours a day and $0.17 per kWh, this bulb costs about $2.48 a year.

Multiply by the number of sockets in the house before deciding that is a small number. A twenty-socket house is where the arithmetic stops being trivial.

Check the panel, not the front of the box

Equivalence claims on the front run a little optimistic — a box marked "60W equivalent" is often a shade under 800 lumens.

The Lighting Facts panel on the back has to print the real figure, and it is the only number on the packaging that is regulated.

Brightness is only half the choice

Colour temperature decides whether the room reads warm or clinical, and it is independent of everything on this page.

Nearby sizes

Filament-Style LED Bulbs: What You Gain, and What You Give UpThey solve a problem no other LED solves, and a large share of them fail the one test you can run with a phone camera.
Same Lumens, Less Light — Why an Equivalent LED DisappointsLumens measure how much light leaves the bulb. Nothing on the box measures how much of it reaches the thing you are looking at.
GU10 or MR16? The Two That Look Alike and Are Not InterchangeableTwo pins and a twist versus two pins and a push. One is mains, one is not, and the fitting in your ceiling only accepts one of them.
The Fan Runs and the Mirror Still Fogs — Six Causes, in OrderThe fan is rarely broken. It is usually starved of make-up air, fighting its own ductwork, or being switched off twenty minutes too early.